Adjusting The Basic Position Of The Hand Brake Lever; Checking The Brake Discs - Husqvarna 701 Enduro 2023 Owner's Manual

13.2

Adjusting the basic position of the hand brake lever

13.3

Checking the brake discs

Warning
Danger of accidents Worn-out brake discs reduce the braking effect.
–
Make sure that worn-out brake discs are replaced immediately. (Your authorized Husqvarna Motor-
cycles workshop will be glad to help.)
3
The button can be used to switch the ABS off manually (see
Starting).
–
Adjust the basic position of the hand brake lever to your hand
size by turning adjusting wheel
Info
Push the hand brake lever forward and turn the
adjusting wheel.
Do not make any adjustments while riding.
S01045-10
–
Check the front and rear brake disc thickness at multiple
points for the dimension
Info
Wear will reduce the thickness of the brake disc at
contact surface
Brake discs - wear limit
front
400406-10
rear
» If the brake disc thickness is less than the specified value.
–
Change the front brake disc.
–
Change the rear brake disc.
–
Check the front and rear brake discs for damage, cracking,
and deformation.
» If the brake disc exhibits damage, cracking, or deforma-
tion:
–
Change the front brake disc.
–
Change the rear brake disc.
BRAKE SYSTEM 13
1
.
A
.
1
of the brake linings.
4.5 mm (0.177 in)
4.5 mm (0.177 in)
67