Checking The Rear Hub Damping Rubber Pieces - Husqvarna 701 Enduro 2023 Owner's Manual

14 WHEELS, TIRES
14.5
82

Checking the rear hub damping rubber pieces

Warning
Danger of accidents Damaged brake discs reduce the braking effect.
–
Always lay the wheel down in such a way that the brake disc is not damaged.
Info
The engine power is transmitted from the rear sprocket to the rear wheel via the 6 damping rubber
pieces. They eventually wear out during operation. If the damping rubber pieces are not changed in
time, the rear sprocket carrier and the rear hub will be damaged.
V00512-10
V00511-10
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the rear wheel.
Main work
–
1
Check bearing .
» If the bearing is damaged or worn:
–
Change the bearing of the rear sprocket carrier.
–
Check damping rubber pieces
and wear.
» If the damping rubber pieces of the rear hub are damaged
or worn:
–
Change all the damping rubber pieces of the rear hub.
–
Lay the rear wheel on a workbench with the rear sprocket
facing upwards and insert the wheel spindle in the hub.
–
A
To check play , hold the rear wheel tight and try to turn
the rear sprocket with your hand.
Info
Measure the play on the outside of the rear sprocket.
Play of damping rubber
pieces on rear wheel
»
A
If clearance is larger than the specified value:
–
Change all the damping rubber pieces of the rear hub.
Finishing work
–
Install the rear wheel. (
–
Remove the motorcycle from the lift stand. (
–
Check the chain tension. (
p. 50)
( p. 79)
2
of the rear hub for damage
≤ 5 mm (≤ 0.2 in)
p. 80)
p. 50)
p. 59)