Finishing Up The Song; Step 4: Press The Mix Down Button And Mix The Song While Adding System Effects - Roland U-8CW Getting Started Manual

Creating Songs with the U-8 and Cakewalk
4
To record the effect-applied sounds without using the EZ RECORDING
function, specify the Input source to MIC/A and put on the INSERT button
on the INPUT INST track. Press the INST button in the RECORD section,
then record the sounds.
Clicking ADVANCED in the effects edit screen opens the Advanced Edit
screen where you can make adjustments to all of the effect's parameters. If
there are more than four parameters, you can freely create the sounds from
within this window. For more information, refer to the "Advanced Edit
Screen" in "Effects Edit Screen" in the U-8 Controller Manual.

Finishing Up the Song

This outline explains how to get a final mixdown of the song, and then
record the song to an external tape recorder, MD, or other device.
Step 4: Press the MIX DOWN Button and Mix the Song
While Adding System Effects
When the U-8's MIX DOWN Button is pressed, a wizard guides you through
the preparations for mixdown.
The following preparations for mixdown are made when the U-8 Mixer is
used.
1
MIX
DOWN
Pressing the
RECORDING Mixdown Wizard.
2
At the EZ RECORDING Mixdown Wizard - Mixdown Destination, use the
CURSOR buttons to select a mixdown destination. Press the
button or click NEXT.
3
At the EZ RECORDING Mixdown Wizard - Track Selection, use the
CURSOR buttons to select whether the audio track you wish to mixdown
to. Press the
48
MIX DOWN button on the U-8 displays the EZ
NEXT button or click NEXT.
You can audition the effect-
applied sounds by pressing
the REC MONITOR button
on the U-8 Mixer, and can
adjust the final mix level
while listening the sounds.
NEXT