Editing The Parameters Of A Stamp Effect - Roland CG-8 User Manual

Creating patches

Editing the parameters of a Stamp Effect

By editing the parameters of a Stamp Effect you can modify the resulting image
produced by the Stamp Patch.
fig.front17.e.eps
1
Make sure that the [STAMP PATCH] pad is lit, and use the [COLOR] knob, [SPEED]
knob, [FADE] knob, [X] knob, [Y] knob, and [Z] knob to edit the parameters of the
Stamp Effect.
The main functions of these knobs are listed below.
• Parameter knobs
[COLOR] knob
[SPEED] knob
[FADE] knob
[X] knob
[Y] knob
[Z] knob
The editable parameters and their result will differ for each effect. For details on the
parameters of the Stamp Effects, refer to "Stamp Effects List" (p. 119).
2
If you want to keep the settings you edited, perform the Save operation (p. 83).
76
[COLOR] knob
[SPEED] knob
[FADE] knob
[Z] knob
[Y] knob
[X] knob
Adjusts a color-related effect.
Adjusts the speed at which the effect moves.
Adjusts the fade. Turn left for fade-to-black, turn right for
fade-to-white.
Adjusts an X-axis (left/right) parameter such as X-axis
position or rotational angle.
Adjusts a Y-axis (up/down) parameter such as Y-axis po-
sition or rotational angle.
Adjusts a Z-axis (forward/back) parameter such as Z-
axis position or rotational angle.
Parameter knobs
If the [DEPTH] button is
lit, press the button so it
goes out.
Some effects have
parameters that cannot be
edited.