Roland CG-8 User Manual page 59

5
Turn the VALUE dial to move the guide, and select the visual pad ([1]–[16]) to which
you want to assign a Photo Picture or Stamp Picture.
The screen is organized into four tabs. You can also use the [VALUE] knob to move
between the tabs. When the guide passes [16] you will move to the next tab.
Conversely, when the guide passes [1] you will move to the preceding tab.
"PHOTO-1"
"PHOTO-2"
"PHOTO-3"
"STAMP"
The position of the pictures shown in the screen corresponds to the location of the
visual pads.
6
Use the [ PREV][NEXT
the [ENTER] button.
The picture select screen will appear.
7
Select a Photo Picture or Stamp Picture.
Example: the screen for selecting a Photo Picture
fig.material-assign02.e.eps
Make your selection using the [
then press the [ENTER] button to confirm your choice.
Cancel the operation and return to
the EDIT PROJECT screen.
Shows
information about
the picture
selected in the
list.
Indicates the current level.
Photo Picture bank 1
Photo Picture bank 2
Photo Picture bank 3
Stamp Picture
] buttons to choose "ASSIGN PICTURE," and press
PREV][NEXT
Enter the folder Return to the next higher level.
selected in the list.
List Turn the [VALUE] dial to select.
] buttons,
About projects
The locations
corresponding to visual
pads to which a Photo
Picture or Stamp Picture is
already assigned will show
that image. This will be
blank if no Photo Picture
or Stamp Picture is
assigned.
59