Roland CG-8 User Manual page 52

About projects
3
Turn the [VALUE] dial to move the guide, and select the visual pad ([1]–[16]) to which
you want to assign the new project.
The position of the projects shown in the screen corresponds to the location of the
visual pads.
You can't assign a project to a visual pad that already has a project assigned to it.
Choose a visual pad to which a project has not yet been assigned (displayed as "—-").
If desired, you can delete an assigned project (p. 56).
4
Use the [ PREV][NEXT
[ENTER] button.
A screen will appear, allowing you to select the destination in which the project is to be
created.
5
Select the destination in which you want to create the new project.
fig.new-project01.e.eps
Make your selection using the [
then press the [ENTER] button to confirm your choice.
Cancel the operation and return to
the PROJECT EDITOR screen.
Indicates the
remaining
amount of space
on the hard disk.
Indicates the current level.
52
] buttons to select "CREATE PROJECT," and press the
PREV][NEXT
Enter the folder Return to the next higher level.
selected in the list.
List Turn the [VALUE] dial to select.
:Folder
] buttons,
You can't create a new
project on a CompactFlash
card inserted in the card
adaptor (included).
You can create a folder and
save the project inside it
(p. 94).