Roland CG-8 User Manual page 80

Creating patches
2
Choose the controller you want to use; the XY pad, the D Beam, or the foot pedal.
Move your finger in the X-axis or Y-axis of the XY pad, place your hand over the left or right D Beam sensor,
or move the foot pedal.
The [CONTROLLER ASSIGN] button will blink, and the display panel will indicate your choice as follows.
• To assign the X-axis of the XY pad
fig.XY-X.e.eps
Move your finger along the X-axis.
• To assign the Y-axis of the XY pad
fig.XY-Y.e.eps
Move your finger along the Y-axis.
• To assign the left sensor of the D Beam
fig.DBEAM-L.e.eps
Place your hand above the left sensor.
• To assign the right sensor of the D Beam
fig.DBEAM-R.e.eps
Place your hand above the right sensor.
• To assign the foot pedal
fig.FOOTPEDAL.e.eps
Press the foot pedal.
80