Roland CG-8 User Manual page 46

Learning more about the CG-8
Flow of operations on the CG-8
As shown in the diagram on the preceding page, the basic operating flow within a
single project in the CG-8 is as follows.
1.
Create a new project if necessary (p. 51).
2.
Load JPEG files into the project from the internal hard disk or from a
CompactFlash card (via the included card adaptor). The loaded files will be
assigned to the visual pads as Photo Pictures (p. 57).
3.
Load PNG files from the internal hard disk or a CompactFlash card (via the
included card adaptor). The loaded files will be assigned to the visual pads as
Stamp Pictures (p. 57).
4.
Select the effect you want to use on the Photo Patch (background image), and
adjust the parameters as desired. Also at this time, select the image you want to
use from the Photo Pictures you assigned in step 2, and create and save the Photo
Patch (p. 62).
5.
Select the effect you want to use for the Stamp Patch (foreground image), and
adjust the parameters as desired. Also at this time, select the image you want to
use from the Stamp Pictures you assigned in step 3, and create and save the
Stamp Patch (p. 73).
6.
Repeat steps 4 and 5.
46