Roland CG-8 User Manual page 81

3
Press the [CONTROLLER ASSIGN] button.
The button will change from blinking to lit, and the display panel will blink "–" in the Number area.
Example: If you selected the left sensor of the D Beam in step 2
fig.display13.eps
4
Turn the [COLOR] knob, [SPEED] knob, [FADE] knob, [X] knob, [Y] knob, or [Z] knob to specify the
parameter that you want to control.
If you want to use the foot pedal to switch patches, press any one of the visual pads.
The [CONTROLLER ASSIGN] button will blink, and the display panel will indicate your choice as follows.
Example 1: If you selected the left sensor of the D Beam pad in step 2
• Control the [COLOR] knob parameter
fig.display14.eps
• Control the [SPEED] knob parameter
fig.display15.eps
• Control the [FADE] knob parameter
fig.display16.eps
• Control the [X] knob parameter
fig.display17.eps
• Control the [Y] knob parameter
fig.display18.eps
• Control the [Z] knob parameter
fig.display19.eps
Creating patches
81