Roland CG-8 User Manual page 53

6
Once you've specified the location in which the new project is to be created, use the
[ PREV][NEXT
[ENTER] button.
A screen will appear, allowing you to enter a name for the new project.
fig.new-project02.e.eps
7
Enter a name for the project.
You can enter a project name of up to eight characters.
[NEXT ] button
[ PREV] button
[VALUE] dial
[EXIT] button
8
When you've entered a name for the project, press the [ENTER] button.
You will return to the PROJECT EDITOR screen, and the project will be assigned to the
visual pad you selected in step 4.
If in step 3 you selected a project to which a project was already assigned, the message
"Project already exists" will appear. In this case, press the [ENTER] button to cancel the
operation and return to the PROJECT EDITOR screen.
] buttons to select "CREATE PROJECT" and press the
Cursor
Moves the cursor toward the right.
Moves the cursor toward the left.
Selects the character to enter. You can use uppercase
(A–Z) and lowercase (a–z) letters, numerals (0–9),
and the "-" (hyphen) and "_" (underline) symbols.
Cancels the operation and returns you to the
PROJECT EDITOR screen.
About projects
53