Roland CG-8 User Manual page 55

3
Turn the [VALUE] dial to move the guide, and select the visual pad ([1]–[16]) to which
you want to assign the project.
The location of the project names shown in the screen correspond to the location of the
visual pads.
4
Use the [ PREV][NEXT
[ENTER] button.
The project select screen will appear.
5
Select a project.
fig.project-assign01.e.eps
Make your selection using the [
then press the [ENTER] button to confirm your choice.
Cancel the operation and return to
the PROJECT EDITOR screen.
Indicates the size
and creation date
of the project.
Indicates the current level.
6
Use the [ PREV][NEXT
button.
You will return to the PROJECT EDITOR screen. The project you selected in step 5 will
be assigned to the visual pad you selected in step 3.
] buttons to select "ASSIGN PROJECT," and press the
PREV][NEXT
Enter the folder Return to the next higher level.
selected in the list.
List Turn the [VALUE] dial to select.
:Project
] buttons to select "ASSIGN," and press the [ENTER]
] buttons,
:Folder
About projects
You can't directly select a
project from a
CompactFlash card. If you
want to use a project that's
stored on a CompactFlash
card, you must first copy it
into the CG-8's internal
hard disk, and then assign
it to a visual pad. For
details on how to copy a
project, refer to
"Managing projects and
pictures" (p. 84).
If in step 3 you select a
visual pad to which a
project is already assigned,
the project assignment for
that pad will be
overwritten. (This only
changes the assignment for
that visual pad; the project
itself will not be
overwritten.)
55