Roland CG-8 User Manual page 58

About projects
2
Use the [ PREV][NEXT
[ENTER] button.
The PROJECT EDITOR screen will appear.
fig.project-menu01.e.eps
3
Turn the VALUE dial to move the guide, and select the project into which you want to
load a Photo Picture or Stamp Picture.
4
Use the [ PREV][NEXT
[ENTER] button.
The EDIT PROJECT screen will appear.
fig.material-assign01.e.eps
58
] buttons to select "PROJECT EDITOR" and press the
Guide
] buttons to select "EDIT PROJECT," and press the
Guide
In the screen, project
names will be shown in
locations corresponding to
the visual pads to which a
project has already been
assigned. If no project has
been assigned, this area
will indicate "—-."
To return to the MAIN
MENU screen, press the
[EXIT] button.
Alternatively, you can
press the [MENU] button
to return to Play mode.
You can't select a project
that is not assigned to a
visual pad (p. 54).
If in step 3 you select a
visual pad to which no
project is assigned
(displayed as "—-"), the
message "No project
assigned" will appear.
Press the [ENTER] button
to return to the PROJECT
EDITOR screen.