Roland CG-8 User Manual page 70

Creating patches
3
Press the [CONTROLLER ASSIGN] button.
The button will change from blinking to lit, and the display panel will blink "–" in the Number area.
Example: If you selected the X-axis of the XY pad in step 2
fig.display06.eps
4
Turn the [COLOR] knob, [SPEED] knob, [FADE] knob, [X] knob, [Y] knob, or [Z] knob to specify the
parameter that you want to control.
If you want to use the foot pedal to switch patches, press any one of the visual pads.
The [CONTROLLER ASSIGN] button will blink, and the display panel will indicate your choice as follows.
Example 1: If you selected the X-axis of the XY pad in step 2
• Control the [COLOR] knob parameter
fig.display07.eps
• Control the [SPEED] knob parameter
fig.display08.eps
• Control the [FADE] knob parameter
fig.display09.eps
• Control the [X] knob parameter
fig.display10.eps
• Control the [Y] knob parameter
fig.display11.eps
• Control the [Z] knob parameter
fig.display12.eps
70