Roland CG-8 User Manual page 100

Adjusting the sensitivity of the controllers
4
The [CONTROLLER ASSIGN] button will blink, and the display panel will indicate
the chosen controller as follows.
• If you selected the X-axis of the XY pad
fig.display21.eps
• If you selected the Y-axis of the XY pad
fig.display22.eps
• If you selected the left D Beam sensor
fig.display23.eps
• If you selected the right D Beam sensor
fig.display24.eps
5
Press the [CONTROLLER ASSIGN] button to confirm your choice of controller, the
one for which you are going to adjust the sensitivity.
6
Operate the controller you selected in step 3 to specify the upper limit value.
fig.display25.eps
7
Press the [CONTROLLER ASSIGN] button to confirm the upper limit value.
8
Operate the controller to specify the lower limit value.
fig.display26.eps
9
Press the [CONTROLLER ASSIGN] button to confirm the lower limit value.
100