Table of Contents
Advertisement
Accent Spot Q4
6.
Operation
Safety Instructions for Operation
Attention
This device must be used only for the purposes it is designed for.
This device is intended for professional use as an indoor spot effect. It is suitable only for indoor
installation. This device is not suitable for households and for general lighting.
Any other use, not mentioned under intended use, is regarded as non-intended and incorrect use.
Attention
Power supply
Before connecting the device to the power supply, make sure that the current, voltage and frequency
match the input voltage, current and frequency specified on the information label on the device.
Control Modes
The Accent Spot Q4 can be operated with a DMX controller and as a stand-alone device.
The Accent Spot Q4 supports the following control modes:
●
Stand-alone:
●
Master/Slave:
●
DMX-512, RDM
For more information about how to connect the devices, refer to 5. Setup on pages 15–17.
To run the auto program, in auto operation mode, select Auto in the Main Menu. See 6.6.3. Auto Mode
on page 24 for more information.
To operate the device manually as a stand-alone device, adjust the intensity values for the colors.
See 6.6.2. Manual Mode on page 24 for more information.
To run one of the built-in programs without a DMX controller:
01) Select Program Mode in the Main Menu.
02) Select one of the 33 static colors (Program 1) or one of the 15 built-in chases (Programs 2–16).
See 6.6.4. Program Mode on page 25 for more information.
To operate the device in the sound-controlled mode, set the sound sensitivity of the device. See
6.7.7. Sound-controlled Mode on page 26 for more information.
Product code: 42541
Auto, Manual, Built-in programs, Sound-controlled
Auto, Manual, Built-in programs, Sound-controlled
4, 6, 12 channels
18
Advertisement
Table of Contents
