Program Mode; Program 1; Program 2-16 - SHOWTEC Accent Spot Q4 V1 User Manual

Accent Spot Q4

Program Mode

In this menu you can run the 16 built-in programs.
01) Press the UP/DOWN buttons to select MODE:
02) Press the SETUP button to confirm the selection.
03) Press the UP/DOWN buttons to select one of the 16 available built-in programs:
●

Program 1:

● Programs 2–16:
04) Press the SETUP button to confirm the selection.
Program 1
In this built-in program you can select one of the 33 color macros and add the strobe effect.
01) Press the UP/DOWN buttons to select COLOR:
02) Press the SETUP button to confirm the selection.
03) Press the UP/DOWN buttons to select one of the 33 available color macros.
04) Press the SETUP button to confirm the selection.
05) Press the UP/DOWN buttons to select STROBE:
06) Press the SETUP button to confirm the selection.
07) Press the UP/DOWN buttons to set the strobe frequency. The adjustment range is 0–99, from off to
high frequency (0–20 Hz).
08) Press the SETUP button to confirm the selection.
Program 2–16
In these built-in programs you can set the program speed and add the strobe effect.
01) Press the UP/DOWN buttons to select SPEED:
02) Press the SETUP button to confirm the selection.
Product code: 42541
See 6.6.4.1. Program 1
See 6.6.4.2. Program 2–16
25