Tactical Public Safety (Tps) (Conventional Only); Using Tps Normal Transmission; Using Tps Emergency Transmission - Motorola APX 5000 3 User Manual

everyone in the Fireground Communication System
with the order to evacuate the incident site.
Your radio sounds the Evacuation Tone at the profile
maximum alert tone volume level. The display shows
EVACUATE.
Perform one of the following actions:
• Move the Volume Control Knob to adjust the
volume of the Evacuation Tone from full
volume.
• Perform any action on the radio other than
volume adjustments to cancel the evacuation
indications and update the command terminal.
• If preprogrammed with Manual
Acknowledgement of Evacuation Command,
pressing the PTT button shall cancel the
indications and acknowledge the command
terminal.
Tactical Public Safety (TPS) (Conventional
Only)
TPS enables the user of a group to identify the start
and the end of a transmission by displaying the caller
name or ID on the radio display.

Using TPS Normal Transmission

At TPS Zone Channel, perform one of the
following actions:
• Press PTT button to transmit. Talk clearly into
the microphone. Release PTT button to listen.
• Receive and listen to call, the radio displays the
caller's name or ID.

Using TPS Emergency Transmission

The following are two important alert tones designed
for this feature.
Emergency During Emergency if the TPS radio
Beacon user pushes the Emergency button,
the radio sounds a Beacon at the
maximum volume of the radio at
radio's internal speaker and it is not
adjustable. This beacon goes to
silent when user presses the PTT
button for voice transmission.
Emergency The radio sounds an alert tone to
Call De-Key remind radio user that the
Sidetone Emergency Mode is still active after
user releases the PTT button for an
93
English