Impres Battery Annunciator; General Radio Information - Motorola APX 5000 3 User Manual

Disabling Transmit Inhibition
Perform one of the following actions:
• Switch the preprogrammed Transmit Inhibit
switch to Transmit Inhibit disabled position.
•
or to TxIn. Press the Menu Select button
below TxIn.
• Press the Transmit Inhibit programmable
button.
Note:
If the user has disabled TX Inhibit via the
softkey and then moves the switch to the
position where TX Inhibit is enabled, the
new value overwrites the menu value.
The display shows Tx inhibit off. You hear a
sequence of short, high-low tone (Transmit Inhibit
Off tone) to indicate transmission is back to normal
operation.

IMPRES Battery Annunciator

This feature displays the current capacity and
charges cycles of your battery when an IMPRES
Battery is powering your radio. This feature must be
enabled in your radio to see the information.
178
English
The information shown are:
Charge
Percentage
Remaining
Capacity
Estimated
Charges
Accessing the Battery Info screen
1
or to Batt.
2 Press the Menu Select button directly below
Batt.
The display shows the details of the battery.
3 To return to the Home screen, press the Menu
Select button directly below Exit.

General Radio Information

Your radio contains information on the following:
™ • Radio Information
• IP Display
• Control Assignments
Percentage of current battery
capacity.
Remaining power of the battery
in mAh.
Number of charges cycles the
battery has gone through.