Mode Select Feature; Saving A Zone And A Channel To A Softkey - Motorola APX 5000 3 User Manual

•
or to CSrh and press the Menu Select
button directly below CSrh.
A blinking cursor appears on the Channel Search
screen.
2 Use the keypad to type or edit your channel
name.
3 To initiate searching, press the Menu Select
button directly below CSrh once the entry is done.
To exit this procedure, press the Menu Select
button directly below Cncl.
The display shows Searching. Once found, the
display shows the matched channel name and the
radio changed its transmission to the selected
channel.
If the radio is triggered to search for an empty entry,
the display shows Invalid entry. Repeat step
search again.
If the entry does not match, the display shows
Channel name not found. Repeat step
again; or press
below Exit to exit.
58
English
2 to search
or the Menu Select button directly

Mode Select Feature

Mode Select allows a long press to save the current
zone and channel of your radio to a programmable
button, keypad button, or a softkey; then once
programmed, the short-press of that button or softkey
changes the transmission to the saved zone and
channel.
There are two methods to save the selected zone and
channel:
• Softkeys
• Programmable buttons and keypad buttons (digit 0
to 9)
Note:
Your radio must be preprogrammed to allow
you to use this feature.

Saving a Zone and a Channel to a Softkey

2 to
Five softkeys are available for you to save the
frequently used zone and channel.
1 Toggle your zone and channel to the required
zone and channel.
2
or to MS1, MS2 ... or MS5.