Advertisement
You hear a Transmit End Tone.
Responding to Evacuation Indicator
When Incident Commander triggers Evacuation
signal from his command terminal, the RF Modem
updates everyone in the Fireground Communication
System with the order to evacuate the incident site.
Your radio sounds the Evacuation Tone at the profile
maximum alert tone volume level. The display shows
EVACUATE.
Perform one of the following actions:
Move the Volume Control Knob to adjust the
•
volume of the Evacuation Tone from full
volume.
•
Perform any action on the radio other than
volume adjustments to cancel the evacuation
indications and update the command terminal.
•
If preprogrammed with Manual
Acknowledgement of Evacuation Command,
pressing the PTT button shall cancel the
indications and acknowledge the command
terminal.
92
English
Tactical Public Safety (TPS) (Conventional
Only)
TPS enabled the user of a group to identify a
transmission starts and ends clearly by displaying the
caller name or ID on the radio display.
Using TPS Normal Transmission
At TPS Zone Channel, perform one of the
following actions:
Press PTT button to transmit. Talk clearly into
•
the microphone. Release PTT button to listen.
•
Receive and listen to call, the radio displays
the caller's name or ID.
Using TPS Emergency Transmission
The following are two important alert tones designed
for this feature.
Emergency
During Emergency if the TPS radio
Beacon
user pushes the Emergency button,
the radio sounds a Beacon at the
maximum volume of the radio at
radio's internal speaker and it is not
adjustable. This beacon goes to
Advertisement
