Trunking System Controls; Operating In Failsoft System - Motorola APX 5000 3 User Manual

channel> with temporary green color intelligent
backlight and you hear a Voice Announcement.
Note:
When the radio loses the GPS signal, the GPS
icon blinks and the radio sounds two high-
pitched tones repetitively to indicate that the
GPS has failed to operate. The radio display
shows the red intelligent light.
Note:
If the first matched channel is not configured
with Voice Announcement, no Voice
Announcement is played.
The system sends a message to your radio. The radio
display shows a direct text message content without
any user operation. This message indicates you are
currently present in a Geofence area. This TMS
remains open on the display until user presses exit/
home to exit this screen.
Note:
If there is another incoming text message
before you exit the previous message, the
message screen shall be refreshed to show
the latest message.
140
English
The following procedure guides you to exit the text
message received.
Press the Menu Select button below Exit or
to return to Home screen.
The other operations are the same as normal
dynamic regroup command.
When the radio exits the Geofence area, your radio
reverts to original channel or newly assigned
talkgroup. The radio display shows the new channel
together with Voice Announcement to indicate the
changes. Voice Announcement of the new channel
only works if that channel is configured with Voice
Announcement.

Trunking System Controls

Operating in Failsoft System

The failsoft system ensures continuous radio
communication during a trunked system failure. If a
trunking system fails completely, the radio goes into
failsoft operation and automatically switches to its
failsoft channel.
During failsoft operation, your radio transmits and
receives in conventional operation on a