Talkgroup Call Feature (Conventional Operation Only) - Motorola APX 5000 3 User Manual

• or
• Use the keypad to enter the required ID.
4 Hold the radio vertically 1 to 2 inches (2.5 to 5.0
cm) from your mouth.
5 Press and hold the PTT button to start the
Selective Call.
The display shows the ID of the target radio.
6 Release the PTT button to listen.
7 Press
to return to the Home screen.

Talkgroup Call Feature (Conventional Operation Only)

This feature allows you to define a group of
conventional system users so that they can share the
use of a conventional channel.
Note:
Encryption keys are associated to talkgroups.
When talkgroups are associated, encryption
keys are changed by changing the active
talkgroup. See
118 for more information.
68
English
to the required ID.
Secure Operations
Selecting a Talkgroup
1
or to Tgrp and press the Menu Select button
directly below Tgrp.
The display shows the last Talkgroup that was
selected and stored.
2 Perform one of the following actions:
•
•
•
3 Press the Menu Select button directly below Sel
to save the currently selected Talkgroup and
return to the Home screen.
If the encryption key associated to the new
Talkgroup is erased, you hear a momentary key
fail tone and the display shows Key fail.
If the encryption key that is associated to the new
Talkgroup is not allowed, you hear a momentary
on page
key fail tone and the display shows Illegal key.
4 Press
to Preset for the preset
or
preprogrammed Talkgroup.
or to the required Talkgroup.
Use the keypad to enter the number of the
corresponding Talkgroup in the list.
to return to the Home screen.