Enabling And Disabling The Radio Alias; Selecting The Audio Speaker - Motorola APX 5000 3 User Manual

This feature allows user to navigate from up to 75
zones in 25 EZBs.
Note:
The Zone Select feature must to be
preprogrammed to the 3-position A-B-C
switch, while the Enhanced Zone Bank feature
must be preprogrammed to any side button or
Top (Orange) button before you can use this
feature.
1 Press the preprogrammed EZB Up or EZB Down
button to scroll the EZB up or down or press and
hold the preprogrammed EZB Up or EZB Down
button to fast scroll the EZB up or down.
2 Turn the 3-Position A/B/C Switch to select the
first, second or third zone in the selected EZB.

Enabling and Disabling the Radio Alias

This feature allows you to display or hide the radio
alias (name).
Press the Menu Select button directly below
MyID.
170
English
The display shows momentary Radio ID off, and
the radio alias disappears from the Home screen or
the display shows momentary Radio ID on, and the
radio alias appears on the Home screen.

Selecting the Audio Speaker

Your radio must be preprogrammed to allow you to
use this feature.
This feature allows you to select the speaker route for
the radio's audio from either the main or the
secondary speaker using the radio profile settings.
While both speakers function together with the
secondary speaker enhancing intelligibility of the
received audio during typical radio operation, each
speaker has an independently-tuned frequency
response and volume level operation.
The secondary speaker also has a "whisper" mode
with a modified volume taper for quieter modes of
operation.
Note:
If an external speaker or microphone
accessory is attached to the radio, neither
internal speaker is operational as audio is
routed to the accessory.