Tactical Public Safety (Tps) (Conventional Only); Using Tps Normal Transmission; Using Tps Emergency Transmission - Motorola APX Series User Manual

Your radio sounds the audible response at the profile
maximum alert tone volume level. The display shows the
configurable programmed alert text and intelligent lighting.
Perform one of the following actions:
• Press the radio Top Side button.
• Press the RSM Side Button 1 if the radio is
connected to RSM.
• Press the PTT button. PTT button must be
configured in CPS to enable this function.
The radio cancels the indications, a tone sounds and
the radio sends an acknowledgment to the command
terminal.
NOTICE:
Move the Volume Control Knob to adjust
the volume of the audible alert from full
volume.
Tactical Public Safety (TPS)
(Conventional Only)
TPS enables the user of a group to identify the start and
the end of a transmission by displaying the caller name or
ID on the radio display.

Using TPS Normal Transmission

At TPS Zone Channel, perform one of the following
actions:
• Press PTT button to transmit. Talk clearly into the
microphone. Release PTT button to listen.
• Receive and listen to call, the radio displays the
caller's name or ID.

Using TPS Emergency Transmission

The following are two important alert tones designed for
this feature.
Emergency Beacon
During Emergency if the TPS radio user pushes the
Emergency button, the radio sounds a Beacon at the
maximum volume of the radio at radio's internal speaker
English
71