Table of Contents
Advertisement
Re-Initiating Man Down
After exiting the Emergency Operation when the radio
is still in Man Down condition (tilted achieving
threshold angle or motionless), user must first exit
Man Down condition to then reinitiate the Man Down
feature.
Return the radio to the vertical position or shake
the radio (when motion sensitivity is enabled).
Testing the Man Down Feature
Enable the Emergency feature with Silent Alarm
disabled, but not in Surveillance Mode before running
this test on the radio.
1 Turn the radio on and place in the vertical position,
for at least 5 seconds.
2 Lay the radio down in the horizontal position.
3 Wait for alert tone.
One of the following scenarios occurs:
•
The radio alerts with audible tone and displays
Man-Down.
98
English
•
If no tone is heard, make sure that the Man Down
feature is enabled on your radio. If Man Down
feature was not enabled, please enable it and
repeat
steps1
to 3.
•
If the Man Down feature is enabled and no tone is
heard, send the radio to a qualified technician.
Automatic Registration Service (ARS)
This feature provides an automated data application
registration for the radio. When you turn on the radio,
the device automatically registers with the server.
Data applications within the fixed network can
determine the presence of a device on the system
and send data to the device. For example: Text
Messaging Service (TMS).
The Automatic Registration Service for the radio
consists of two (2) modes:
•
ARS Server Mode (default mode)
•
ARS Non-Server Mode
Note:
The default ARS mode can be changed by a
qualified radio technician using the radio's
programming software.
Advertisement
Table of Contents
