Table of Contents
Advertisement
APX radios during Mission Critical operations
as other Bluetooth
meet the mission critical standard.
Your radio must be preprogrammed to allow
you to use this feature.
The use of this feature requires the "Full
Feature" expansion board together with the
Bluetooth Software.
The default setting for Bluetooth-enabled radio is
Bluetooth on. See
Turning Off the Bluetooth
144 to turn off the Bluetooth.
Currently your radio supports the following Bluetooth
devices or profiles.
•
Headset (HSP)
•
Dial Up Networking (DUN)
•
Personal Area Networking (PAN)
•
Serial Port (SPP)
•
Generic Access Profile (GAP)
Turning On Bluetooth
The following methods are options on how to turn on
the Bluetooth. The result of all the methods is the
same. You can use the options interchangeably
®
devices may or may not
on page
depending on your preference and the programmed
functions.
Turning on the Bluetooth via the radio menu BT:
•
a)
or to BT. To access the Bluetooth feature
screen, press the Menu Select button directly
below BT.
to Status and press the Menu Select
b)
or
button directly below On.
The display shows Status On, and
appears.
If Bluetooth fails to launch, the display shows
Bluetooth on failed.
c) To return to the Home screen, press the Menu
Select button directly below Exit.
•
Turning on the Bluetooth via the preprogrammed
button:
a) Press the preprogrammed button to turn on the
Bluetooth.
You hear a short, medium-pitched tone. The
display shows momentary Bluetooth on, and
appears.
143
English
Advertisement
Table of Contents
