Table of Contents
Advertisement
3 For radio enabled with Unit ID, perform one of the
following actions:
to [UnitID Entry] and press the
•
or
Menu Select button directly below Edit. A
blinking cursor appears. Use the keypad to
type or edit a Unit ID. Press the Menu Select
button directly below Ok to submit.
•
or
to scroll through the list of predefined
Unit IDs. Press the Menu Select button directly
below Sel to select the predefined Unit ID.
•
Press and hold
or
list of predefined Unit IDs at a fast scroll rate.
Press the Menu Select button directly below
Sel to select the predefined Unit ID.
If the selected predefined Unit ID has more than
the maximum allowed characters, or an invalid
character in it, the display shows momentary
Invalid UnitID.
4 Enter your password when you see a blinking
cursor.
5 Press the Menu Select button directly below Logn
or Ok.
to scroll through the
If only one-factor is enabled, the display shows 1F
logged at the status. The login operation is
complete.
If login fails, the display shows momentary Login
failed. The display returns to User Login
screen.
6 For radio enabled with two-factor login, enter your
passcode when you see a blinking cursor.
7 Press the Menu Select button directly below
Logn.
The display shows In progress.
If the login fails, the display shows momentary 2F
pscd failed. Press the Menu Select button directly
below Pscd to re-enter passcode. If successful, the
display shows User Login screen with 2F logged
in status to indicate Two-Factor Authentication
complete.
Logging out of Two-Factor Authentication
Note:
Private data refers to all messages in the text
messaging Inbox, Draft, and Sent folder. The
next user is able to access the Inbox, Draft
115
English
Advertisement
Table of Contents
