Table of Contents
Advertisement
Tactical Public Safety (TPS)
(Conventional Only)
TPS enables the user of a group to identify the start and
the end of a transmission by displaying the caller name or
ID on the radio display.
Using TPS Normal Transmission
At TPS Zone Channel, perform one of the following
actions:
•
Press PTT button to transmit. Talk clearly into the
microphone. Release PTT button to listen.
•
Receive and listen to call, the radio displays the
caller's name or ID.
Using TPS Emergency Transmission
The following are two important alert tones designed for
this feature.
Emergency Beacon
During Emergency if the TPS radio user pushes the
Emergency button, the radio sounds a Beacon at the
maximum volume of the radio at radio's internal speaker
and it is not adjustable. This beacon goes to silent when
user presses the PTT button for voice transmission.
Emergency Call De-Key Sidetone
The radio sounds an alert tone to remind radio user that
the Emergency Mode is still active after user releases
the PTT button for an Emergency call transmission. The
volume of loudness depends on the maximum tone at
your radio profile.
1 Press the Emergency button to enter Emergency
Mode.
You hear the Emergency Beacon.
2 Press PTT button to make an Emergency Call.
3 Release to listen.
You hear Emergency Call De-Key Sidetone. After a
short pause, you hear Emergency Beacon.
4 Long press Emergency button to exit Emergency
mode and cancel Emergency Beacon.
English
109
Advertisement
Table of Contents
