Placing Calls On Hold - Cisco 7920 Phone Manual

Placing Calls on Hold

You can have only one active call at a time, so you
must place calls on hold while you answer another
call.
If you want to...
Place a call on
hold
Resume a held call
Choose between
two connected
calls
Move a shared-line
call between your
desk phone and
your wireless
phone
Figure 3-2 Choosing Between Two Connected Calls
Cisco Wireless IP Phone 7920 for Cisco CallManager
Then...
During a connected call, press
Hold. The label changes to
Resume.
Press Resume to reconnect to a
holding call.
Scroll between different calls that
are displayed on the screen. See
Figure 3-2.
From your phone with the active
call, press Hold. From your other
phone with the shared line, press
Resume to connect to the call.
Basic Call Handling
35