Paper and Other Media
Number of sheets that can
be set
Both-sided printing
Additional cautions
Paper not supported
This printer has difficulty printing on or feeding through certain types of paper.
Do not use paper that is
• designed for an ink-jet printer
• bent, folded, or creased
• curled or twisted
• torn
• wrinkled
• damp
• envelopes
• dry enough to emit static electricity
• already been printed onto (except preprinted letterheads).
Malfunctions are especially likely when using paper printed on by other than
a laser printer (e.g. monochrome or color copiers, ink-jet printers, etc.)
• Non-standard paper, such as thermal paper, aluminum foil, carbon paper or
conductive paper
• is heavier or lighter than the limitation
• embossed, perforated, has holes, windows, or cutouts
• label paper with areas of glue or whose base paper is exposed
• stapled, or has paper clips attached
Print Area
The following shows the print area possible with this printer. Be sure to set the
print margins correctly using the application.
One
❒ Load only one OHP transparency at the same time onto the by-
pass tray.
Not possible
•
Print speed for OHP transparencies is slower than for plain pa-
per.
•
Due to switching modes, the machine will be on standby for
thirty or forty seconds after the job was received.
61