Connecting the Machine
Connecting the machine to the host using
a USB cable (optional)
❒ The optional USB 2.0 interface board is supported by Windows 98
SE/Me/2000/XP, Windows Server 2003, Mac OS 9.x, and Mac OS X Classic
mode.
• For Windows 98 SE/Me:
Be sure to install USB Printing Support. If USB 2.0 is used with Windows
98 SE/Me, only a speed equal to that of USB 1.1 is possible.
• For Mac OS:
Mac OS supports only the standard USB port. If USB 2.0 is used with a
Mac OS, only a speed equal to that of USB 1.1 is possible.
A
Connect the USB 2.0 interface cable to the USB port on the right side of
the machine's back cover.
B
Connect the opposite end's flat connector to devices such as your com-
puter's USB interface, or a USB hub.
The machine and the computer are now connected. Next, the "Plug and Play"
screen appears. For details, see "Preparation for Printing", Software Guide.
42