Configuration; Ethernet Configuration - Ricoh Aficio AP900 Operating Instructions Manual

Configuration

Ethernet Configuration

Make the following network settings according to the network interface you are
using.
When connecting the machine to a network using an Ethernet cable or the op-
tional extended wireless LAN board, use the control panel to make the neces-
sary settings according to your network environment.
You can use SmartDeviceMonitor for Admin or a Web browser to make IP ad-
dress-related settings in a TCP/IPcapable environment.
Setting Name Value
DHCP On
011.022.033.044
*1
IP Address
*1 000.000.000.000
Subnet Mask
Gateway Ad- 000.000.000.000
*1
dress
Frame Type Auto Select
(NW)
Active Protocol TCP/IP
NetWare
SMB
AppleTalk
Ethernet Speed Auto Select
*2
LAN Type Ethernet
*1
If DHCP is in use, the IP address, subnet mask, and gateway address are all set au-
tomatically.
*2
Make this setting only when necessary. See Software Guide.
A
Press the {Menu} key.
G1267203_v1.00
Active
Active
Active
Active
43
Copyright © 2005