Ricoh Aficio AP900 Operating Instructions Manual page 64

Paper and Other Media
❒ For the right stack, align the right edge of the print paper to the right edge
of the tray. For the left stack, align the left edge of the print paper to the left
edge of the tray.
(left half of tray pulled fully out)
❒ Do not stack paper higher than the limit mark inside the tray.
❒ For the left stack, align the left edge of the print paper with the left edge of
the tray.
❒ Shuffle the paper before loading.
❒ Straighten curled or warped paper before loading.
❒ Ensure framed and other types of preprinted paper are correctly loaded.
Specifying the paper type
When you load translucent paper or postcards, set the paper type accordingly.
❒ For OHP transparencies, only the bypass tray can be used.
❒ Paper type setting can also be set using the printer driver. When this is done,
no action is required here.
❒ The paper type selected using the printer driver overrides that selected using
the control panel.
❒ When you do not wish to use the printer driver, make the setting using the
control panel.
For printer driver settings, see the printer driver Help.
64