Ricoh Aficio AP900 Operating Instructions Manual page 68

Paper and Other Media
C
Square the paper and load it in the paper tray. Press the lock button.
❒ Do not stack paper higher than the limit mark inside the tray.
❒ For the left stack, align the left edge of the print paper with the left edge of
the tray.
❒ Adjust the side fences to the paper width to eliminate any gap, and then
press the lock button to set them.
❒ Fan the paper before loading.
❒ Straighten curled or warped paper before loading.
❒ Ensure framed and other types of preprinted paper are correctly loaded.
D
Set the paper size selector knob inside the tray to the new size.
E
Gently push the paper tray until it stops.
F
Check the paper size displayed on the display panel.
Specifying custom size paper
To use a paper size that are not indicated on the selector knob, slide the selector
to the leftmost position " * ".
• Vertical: 139.7 - 297.0 mm (5.5 - 11.7 inches)
68