Network Setup - Ricoh Aficio AP900 Operating Instructions Manual

Configuration
• IP Address
• Subnet Mask
• Gateway Address
The current IP address appears on the display.
❒ To obtain the IP address for the printer, contact your network administrator.
J
Press the {U} or {T} key to enter the leftmost entry field of the IP ad-
dress, and then press the {# Enter} key.
IP Address:
192.022.033.044
❒ The value changes in increment of 10 if the {U} or {T} key is held down.
❒ If you do not need to adjust the value, then press the {# Enter} key. The
screen changes, and the next field can then be entered.
❒ Do not set "011.022.033.044" as the IP address.
K
Press the {# Enter} key.
The screen changes, and the next field can then be entered.
IP Address:
192.168.000.010
L
Repeat the procedure, and then press the {# Enter} key.
To display the previous field, press the {Escape} key.
M
To use TCP/IP, assign [Subnet Mask] and [Gateway Address] following the
same procedure for entering the IP address.
N
Press the {U} or {T} key to display [DHCP], and then press the {# Enter}
key.

Network Setup:

DHCP
O
Press the {U} or {T} key to display On, and then press the {# Enter} key.
DHCP:
*On
After about two seconds, the display returns to the network setup menu.
45