Ricoh Aficio AP900 Operating Instructions Manual page 49

Configuration
Confirm with the network administrator concerning the SSID you want to use.
IEEE 802.11b:
SSID
The SSID menu appears on the display.
SSID:
View
If you select [View], you can confirm the SSID when set. If the SSID is not en-
tered, the [SSID not entered] message appears, and the screen returns to [IEEE
802.11b].
K
Press the {U} or {T} key to display [Enter ID], and then press the {# Enter}
key.
The following message appears on the display.
SSID
k
The value in brackets at the upper right is the number of characters entered.
L
Press the {U} or {T} key to select characters, and then press the {# En-
ter} key.
SSID
A
You can now enter the next character.
M
Continue entering the key.
The characters that can be used are ASCII 0x20-0x7e (32 bytes).
To display the previous character, press the {Escape} key.
N
After entering the key, press the {# Enter} key twice.
After the settings are made, the screen returns to the IEEE 802.11b setting
menu.
O
When using a WEP key on a network, activate the WEP setting to be
used for communication along with WEP.
Confirm with the network administrator concerning the WEP Key to use.
P
Press the {U} or {T} key to display [WEP Setting], and then press the {#
Enter} key.
[ 0]
[ 1]
49