Ricoh Aficio AP900 Operating Instructions Manual page 76

Paper and Other Media
The paper selection menu appears.
C
Check [Bypass Size] appears, and then press the {# Enter} key
The paper size selection menu appears.
D
Press the {U} or {T} key to display [Custom Size], and then press the {#
Enter} key.
The custom size menu appears.
Custom Size:
Horiz.
E
Press the {U} or {T} key to set the horizontal value, and then press the
{# Enter} key.
❒ Pressing the {U} or {T} key increases or decreases the value in incre-
ments of 0.01 inch. Pressing and holding increases or decreases in incre-
ments of 0.1 inch. Holding continuously increases or decreases in
increments of 1 inch.
The screen for entering the vertical value appears.
F
Press the {U} or {T} key to set the vertical value, and then press the {#
Enter} key.
Custom Size:
Vert.
After about two seconds, the display returns to the menu.
G
Press the {Online} key.
The initial screen appears.
Specifying the paper type
When you load OHP transparencies, translucent paper, or postcards, set the pa-
per type.
❒ We recommend loading OHP transparencies in the L direction.
❒ We recommend loading OHP transparencies in the long-edge feed direction.
Paper type can also be set using the printer driver. When this is done, no ac-
tion is required .
❒ The paper type selected using the printer driver overrides that selected using
the control panel.
❒ When the printer driver is not used, make settings using the display panel.
5.50 "
11.69 "
76