Slide Door Operation - True TBR Series Installation Manual

Cabinet Adjustments, Servicing & Component Replacement (cont.)
Slide Door Operation – Door Adjustment
Only adjust the cabinet after it has been installed in its final
location and correctly leveled.
Procedure
1. Completely close the slide doors and check for openings. If
there are any gaps/openings between the closed doors and
cabinet, the doors will need to be adjusted.
2. With a 7/16" wrench or adjustable wrench and 1/8" Allen
wrench, loosen the roller and move it along the slotted hole.
After the adjustment has been made tighten the roller into
place. See fig. 1.
Slide Door Operation – Hold-Open Feature
The hold-open feature keeps the door in the open position.
Procedure
1. Slide the door open.
2. Latch the door in the open position from the back side of door
(notch in track). See figs. 1 and 2.
NOTE: Figs. 1 and 2 show the rear view of the door and track.
Page 34 of 40
TBR | TDR SERIES
Fig. 1. Adjust the roller.
Fig. 1. Door latch is in the open position (engaged with notch).
Fig. 2.
Door latch is in the closed position (disengaged from notch).
03/2/2023
www.truemfg.com
P#803294 TEC_TM_043 | REV. F | EN