Beer Drain Bottle & Hanger; Access Ports - True TBR Series Installation Manual

Cabinet Setup (cont.)
Beer Drain Bottle & Hanger
An optional beer drain bottle and hanger may be purchased to
collect the overflow from the draft spill tray. The bottle hanger
slides over the top of the beer keg. See fig. 3.
Route a 3/4" (19 mm) I.D. vinyl hose from the spill tray tube into the
drain bottle. Empty the bottle as determined by usage.
Fig. 3.
Drain bottle and hanger on keg.
TEC_TM_043 | REV. F | EN
TBR | TDR SERIES

Access Ports

Access ports provide optional locations to route external beer lines,
CO₂ lines, or overflow beer spill tray drain lines.
Carefully drill through the access port's inner and outer sleeves.
Once the lines have been routed, seal around the line with food
grade silicone.
Standard large-floor
next to evaporator cover.
03/2/2023
www.truemfg.com
Standard small-floor
opposite evaporator cover.
Standard small-side wall
opposite evaporator cover.
Page 13 of 40