Table of Contents
Advertisement
Cabinet Adjustments, Servicing & Component Replacement (cont.)
Slide Door Removal
DO NOT use the side latch before removing the slide door. The
tension on the door cord is needed to execute these operation
instructions.
The doors cannot be removed unless they are positioned as
described in the instructions below.
Procedure
1. Position the doors as described below. To remove, lift the
positioned door. Then, tilt the top of the door back until the
rollers exit the door channel. Then, swing the bottom of the
door out of the bottom channel. See figs. 1 and 2.
Two-Door Units
Center the front door on the cabinet opening. See fig. 3.
Three-Door Units See fig. 4
• Center Door: Slide 9" (228.6 mm) right
• Right Door: Slide 14" (355.6 mm) left
• Left Door: Slide 9-1/2" (241.3 mm) right
CENTERED DOOR
Fig. 3.
Two-Door Units: Position the front door at the center of the cabinet.
Page 32 of 40
TBR | TDR SERIES
Fig. 1.
Door channel openings.
Fig. 2.
Carefully remove the door.
LEFT
9-1/2"
241.3
mm
Fig. 4.
Three-Door Units: Move the doors as directed to remove doors from channel.
03/2/2023
www.truemfg.com
CENTER
9"
RIGHT
228.6
14"
mm
355.6
mm
P#803294
TEC_TM_043 | REV. F | EN
Advertisement
Table of Contents
