Table of Contents
Advertisement
Quick Links
True Manufacturing Co., Inc.
FLM-54/54F~TSL01
Be sure to read and fully understand
before installing, operating, maintaining or servicing
this appliance. Failure to do so can result in appliance
failure, property damage, serious injury or death.
Appliance failure, injury or property damage due to
improper installation is not covered by warranty.
True Manufacturing Co., Inc.
2001 East Terra Lane • O'Fallon, Missouri 63366-4434
(636) 240-2400 • FAX: (636)-272-2408
International FAX: (636)-272-7546 • (800)-325-6152
Parts Department: (800)-424-TRUE (424-8783)
Parts Department FAX: (636)-272-9471
North America – Canada and Caribbean
Warranty Phone +1 855-878-9277
Warranty Fax +1 636-980-8510
Warranty Email warrantyinquiries@truemfg.com
Technical Phone +1 855-372-1368
Technical Email service@truemfg.com
7:00 am–6:00 pm CST Monday–Friday,
8:00 am–12:00 pm Saturday
TEC_TM_181 | REV. A | EN
WARNING!
this document
Mexico
Phone +52 555-804-6343/44
service-mexicocity@truemfg.com
9:00 am–5:30 pm M–F
Latin America
Phone: +52 555-804-6343/44
servicelatam@truemfg.com
9:00 am–5:30 pm M–F
INSTALLATION MANUAL
FLM-81/81F~TSL01
TRUE tracks the history of your appliance
For easy reference, record your appliances full model name and
serial number below. This information is on your serial label.
Serial label location varies by appliance.
Model Name:
Serial Number:
INSTALLATION MANUAL
UK, Ireland, Middle East,
Africa & India
Phone: +44 (0) 800-783-2049
Service-emea@truemfg.com
8:30 am–5:00 pm M–F
Australia
Phone: +61 2-9618-9999
service-aus@truemfg.com
8:30 am–5:00 pm M–F
03/23/2023
FLM
USER ACTION!
by its serial number.
Translation of the Original Instructions
European Union & Commonwealth
of Independent States
Phone: +49 (0) 7622-6883-0
service-emea@truemfg.com
8:00 am–5:00 pm M–F
FLM
Advertisement
Table of Contents
Related Manuals for True FLM
Summary of Contents for True FLM
- Page 1 USER ACTION! WARNING! this document Be sure to read and fully understand TRUE tracks the history of your appliance by its serial number. before installing, operating, maintaining or servicing For easy reference, record your appliances full model name and this appliance. Failure to do so can result in appliance serial number below.
-
Page 2: Table Of Contents
F O R YO U R PU R C H A S E Congratulations! The primary purpose of this document is to assist the installation, maintenance, and servicing of your TRUE appliance. This document contains information important to safety, operation, maintenance, and servicing. DO NOT discard this document. -
Page 3: Preface
The warning, guidelines, and recommendations within this document are meant to prevent appliance damage, injury, or death. Please carefully read all warnings, guidelines, and recommendations before proceeding to ensure the continued safe use and maintenance of your TRUE appliance. Signal & Symbol Definitions Below are symbols you may see in this document. -
Page 4: Important Safety Information
MODEL SERIES truemfg.com Important Safety Information Important Safety Information Basic Safety & Operation Warnings Follow basic safety precautions, including the following, to reduce risk of personal injury, electric shock, fire, or death. WARNING! Be sure to read and fully understand this document before installing, operating, maintaining, or servicing this appliance. Failure to do so can result in appliance failure, property damage, serious injury, or death. -
Page 5: Personal Injury Warnings
Important Safety Information (cont.) Personal Injury Warnings Only qualified technicians should install and service the appliance. For assistance finding a qualified technician, please visit our Service Company Locator at truemfg.com/support/service-company-locator. TRUE is solely the appliance manufacturer and is not responsible for installation. DANGER! allow children to play with or in the appliance. -
Page 6: Hydrocarbon Refrigerant Warnings
MODEL SERIES truemfg.com Important Safety Information (cont.) Hydrocarbon Refrigerant Warnings TRUE appliances use hydrocarbon refrigerant (R-290/513A/600a). Check the serial label to identify the appliance's refrigerant. Serial label location varies by model. DANGER! Risk of fire or explosion! Flammable refrigerant used. -
Page 7: Electrical Safety Warnings
• Before connecting your appliance to the power supply, verify the power supply is correctly grounded. If the power supply is not grounded, correct immediately. TRUE recommends hiring a qualified electrician to inspect your wall outlet and circuit to ensure they are properly grounded •... -
Page 8: About Your Appliance & Installation Requirements
If the power supply is not grounded, correct immediately. • Ensure the installation location will provide adequate Thank you for choosing TRUE Manufacturing to meet your clearances and sufficient airflow for the cabinet. See refrigeration needs. TRUE highly recommends a qualified "Clearances"... -
Page 9: Electrical Requirements
NEMA Plug Configurations USER ACTION! 60 HZ USE ONLY! TRUE uses these types of NEMA plugs shown. If you DO NOT have Find a copy of the wiring diagram with our serial number lookup at the proper outlet, have a licensed electrician verify and install the truemfg.com/support/serial-number-lookup... -
Page 10: Installation & Setup
• If the appliance is damaged, note all damage on maintenance and cleaning procedures. the delivery receipt, immediately file a claim with he delivery freight carrier, and contact TRUE. tools, safety equipment, and PPE Use appropriate NOT install the unit or put it in service. - Page 11 MODEL SERIES truemfg.com Installation & Setup (cont.) Procedure 1. Remove the outer packaging (cardboard and bubble or Styrofoam corner and clear plastic). See fig. 1. NOTICE › DO NOT remove the shipping bracket (glass swing doors; fig. 2) until the appliance is installed in its final location.
-
Page 12: Appliance Location
MODEL SERIES truemfg.com Installation & Setup (cont.) Appliance Location Procedure – Leveling Screws If leveling screws are not factory installed, then, with access to the • Ensure that the drain hose or hoses are positioned in the pan. appliance bottom, install the leveling screws into the threaded holes in the frame rail or appliance bottom. -
Page 13: Leveling The Appliance
Proper leveling of your TRUE appliance is critical to operating The following procedure describes sealing a non-mobile appliance success (for non-mobile appliances). Leveling impacts effective to the floor for NSF standards. -
Page 14: Shelf Installation
USER ACTION! Shelf Bracket For ease of installation, True recommends installing Fig. 1. The cantilever shelf components. the lower shelf first. NOTICE! Bracket Support Tab Doors are manufactured with a 90°... -
Page 15: Appliance Operation
All you need to do is plug in the appliance. • Good air flow inside your TRUE appliance is critical. Take care to prevent product from pressing against the sides or back wall and coming within 4" (101.6 mm) of the evaporator housing. -
Page 16: Temperature Control & Light Switch Location
MODEL SERIES truemfg.com Appliance Operation (cont.) Temperature Control & Light Switch Location The light symbol shows the approximate location of the light switch. Light Switch Inside the top ceiling. Electronic Temperature Control Behind the front bottom grill. Page 16 of 32 03/23/2023 P#205513 TEC_TM_181 | REV. -
Page 17: General Sequence Of Operation
MODEL SERIES truemfg.com Appliance Operation (cont.) General Sequence of Operation — Refrigerator and Freezer Appliances USER ACTION! For more information regarding a appliance's temperature control adjustment or general sequence of operation, please see our Temperature Control Adjustment—Sequence of Operation Manual in our resource library at or scan the truemfg.com/service-manuals/sequence-of-operation code. -
Page 18: Maintenance & Servicing
MODEL SERIES truemfg.com Maintenance & Servicing Maintenance & Servicing WARNING! WARNING! • should install and Only qualified technicians Risk of electric shock or burn! service the appliance. For assistance finding • Powering off an electronic control or setting a qualified technician, please visit our Service temperature controls to the 0 (off) position DOES Company Locator at... -
Page 19: Component Replacement
Fig. 1. Example of OEM parts. Use of non-OEM components may void TRUE's warranty. • Have a licensed service provider service your unit to minimize the risk of possible ignition due to incorrect parts or improper service and to ensure the operator's health and safety. -
Page 20: Recommended Maintenance
MODEL SERIES truemfg.com Maintenance & Servicing (cont.) Recommended Maintenance See recommended maintenance tasks and frequencies below. Some tasks may be required more frequently based on your installation. Maintenance Tasks Monthly Quarterly Annually Verify the appliance maintains product temperature. Inspect power cord for damage; if damaged, replace immediately. Verify the power cord is fully plugged into the wall receptacle Inspect the overall condition of the appliance and its components (such as castors, doors, and hinges). - Page 21 MODEL SERIES truemfg.com Maintenance & Servicing (cont.) Model: Serial Number: Jan. Feb. Mar. Apr. Jun. Jul. Aug. Sep. Oct. Nov. Dec. TEC_TM_181 | REV. A | EN 03/23/2023 Page 21 of 32...
-
Page 22: Condenser Coil Cleaning
MODEL SERIES truemfg.com Maintenance & Servicing (cont.) Condenser Coil Cleaning Required Tools WARNING! Required tools include (but may not be limited to) the following: • Phillips screwdriver or bit driver for performing The appliance owner is responsible • 1/4" nut driver a Personal Protective Equipment (PPE) Hazard •... - Page 23 MODEL SERIES truemfg.com Maintenance & Servicing (cont.) Fig. 1. Front louver grill screw location. Two-door unit shown. Fig. 2. Carefully pull the front louver grill away from the unit. Fig. 3. Never brush across coil fins! Fig. 4. Verify all blockages have been removed. Fig.
-
Page 24: Important Warranty Information
Maintenance & Servicing (cont.) Important Warranty Information General Surface Care & Cleaning If you have any questions, please contact your local TRUE WARNING! Manufacturing Service Department. See the front cover for locations and contact information. Risk of electrical shock or fire! •... -
Page 25: Stainless Steel Care & Cleaning
MODEL SERIES truemfg.com Maintenance & Servicing (cont.) Stainless Steel Care & Cleaning USER ACTION NOTICE! The use of proprietary names is intended for use any steel wool, abrasive, or chlorine- example only and does not constitute or imply an DO NOT based products to clean stainless steel surfaces. -
Page 26: Tips To Help Prevent Rust On Stainless Steel
MODEL SERIES truemfg.com Maintenance & Servicing (cont.) 8 Tips to Help Prevent Rust on Stainless Steel Maintain the Cleanliness of Your Equipment Rinse Avoid build-up of hard stains by cleaning frequently. Use When using chlorinated cleaners, you must rinse and wipe dry cleaners at the recommended strength (alkaline chlorinated or immediately. -
Page 27: Reversing The Sign Deflector
MODEL SERIES truemfg.com Maintenance & Servicing (cont.) Reversing the Sign Deflector The sign deflector reflects the light from the LED module. Factory- install reflects the light back onto the product. For applications with door decal, reverse the sign deflector to shine light through the decal. -
Page 28: Warranty Information (Usa & Canada Only)
MODEL SERIES truemfg.com Warranty Information (USA & Canada Only) Warranty Information To view and download the Warranty Information for USA & Canada, please scan the QR code below. Page 28 of 32 03/23/2023 P#205513 TEC_TM_181 | REV. A | EN... - Page 29 MODEL SERIES truemfg.com NOTES TEC_TM_181 | REV. A | EN 03/23/2023 Page 29 of 32...
- Page 30 MODEL SERIES truemfg.com NOTES Page 30 of 32 03/23/2023 P#205513 TEC_TM_181 | REV. A | EN...
- Page 31 MODEL SERIES truemfg.com NOTES TEC_TM_181 | REV. A | EN 03/23/2023 Page 31 of 32...
- Page 32 truemfg.com 03/23/2023 P#205513 TEC_TM_181 | REV. A | EN BP_201796_02.23...