True TBR Series Installation Manual page 33

Cabinet Adjustments, Servicing & Component Replacement (cont.)
Slide Door Removal (cont.)
2. Remove the door cord from the roller bracket. See figs. 5 and 6.
NOTE: The black plastic tab holding the door cord slides out
the back.
3. Let the door cord slowly retract back into the door side
channel.
NOTE: When reinstalling the door, be sure the door cord
grommet attaches to roller slot closest to the pulley.
See fig. 7.
TEC_TM_043 | REV. F | EN
TBR | TDR SERIES
Fig. 5. Remove the door cord from the roller bracket.
Fig. 6.
Slide the the black tab holding the door cord out the back
Fig. 7.
Be sure the door cord is in the roller slot closest to the pulley.
03/2/2023
www.truemfg.com
Page 33 of 40