Table of Contents
Advertisement
Quick Links
True Manufacturing Co., Inc.
TAC-14GS-HC-LD
Be sure to read and fully understand
before installing, operating, maintaining or servicing
this appliance. Failure to do so can result in appliance
failure, property damage, serious injury or death.
Appliance failure, injury or property damage due to
improper installation is not covered by warranty.
True Manufacturing Co., Inc.
2001 East Terra Lane • O'Fallon, Missouri 63366-4434
(636) 240-2400 • FAX: (636)-272-2408
International FAX: (636)-272-7546 • (800)-325-6152
Parts Department: (800)-424-TRUE (424-8783)
Parts Department FAX: (636)-272-9471
North America – Canada and Caribbean
Warranty Phone +1 855-878-9277
Warranty Fax +1 636-980-8510
Warranty Email warrantyinquiries@truemfg.com
Technical Phone +1 855-372-1368
Technical Email service@truemfg.com
7:00 am–6:00 pm CST Monday–Friday,
8:00 am–12:00 pm Saturday
TEC_TM_086 | REV. C | EN
TAC-72-LD
*DISCONTINUED
WARNING!
this document
Mexico
Phone +52 555-804-6343/44
service-mexicocity@truemfg.com
9:00 am–5:30 pm M–F
Latin America
Phone: +52 555-804-6343/44
servicelatam@truemfg.com
9:00 am–5:30 pm M–F
INSTALLATION MANUAL
TRUE tracks the history of your appliance
For easy reference, record your appliances full model name and
serial number below. This information is on your serial label.
Serial label location varies by appliance.
Model Name:
Serial Number:
INSTALLATION MANUAL
UK, Ireland, Middle East,
Africa & India
Phone: +44 (0) 800-783-2049
Service-emea@truemfg.com
8:30 am–5:00 pm M–F
Australia
Phone: +61 2-9618-9999
service-aus@truemfg.com
8:30 am–5:00 pm M–F
12/13/2023
AIR CURTAIN
TAC-48SM-LD
*DISCONTINUED
USER ACTION!
by its serial number.
AIR CURTAIN
Original Instructions
European Union & Commonwealth
of Independent States
Phone: +41 61 563 0705
service-emea@truemfg.com
8:00 am–5:00 pm M–F
975542-C
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for True TAC-14GS-HC-LD
Summary of Contents for True TAC-14GS-HC-LD
- Page 1 USER ACTION! WARNING! this document Be sure to read and fully understand TRUE tracks the history of your appliance by its serial number. before installing, operating, maintaining or servicing For easy reference, record your appliances full model name and this appliance. Failure to do so can result in appliance serial number below.
-
Page 2: Table Of Contents
Below are symbols you may see in this document. Some symbols may not appear. Signal Word Definitions Congratulations! The primary purpose of this document is to assist the installation, maintenance, and servicing of your TRUE appliance. DANGER! An imminently hazardous situation which, if not avoided, will result in serious injury or death. -
Page 3: Important Safety Information
Personal Injury Warnings Important Safety Information Only qualified technicians should install and service the appliance. For assistance finding a qualified technician, please visit our Service Company Locator at truemfg.com/support/service-locator. TRUE is solely the appliance manufacturer and is not responsible for installation. DANGER! Basic Safety &... -
Page 4: Hydrocarbon Refrigerant Warnings
DO NOT damage the refrigeration system during transportation and installation. is not grounded, correct immediately. TRUE recommends hiring a qualified electrician to inspect your wall outlet and circuit to ensure they are properly grounded. • If the appliance is damaged, verify the refrigeration system's integrity is not compromised before proceeding. -
Page 5: About Your Appliance & Installation Requirements
55% relative humidity. the power supply is correctly grounded. If the power supply Thank you for choosing TRUE Manufacturing to meet your is not grounded, correct immediately. • Place appliance in an area that will not have any air drafts. -
Page 6: Electrical Requirements
60 HZ USE ONLY! Find a copy of the wiring diagram with our serial number TRUE uses these types of NEMA plugs shown. If you DO NOT have lookup at the proper outlet, have a licensed electrician verify and install the truemfg.com/support/serial-number-lookup. -
Page 7: Installation & Setup
3. If leveling legs or castors will not be used, remove the cabinet he delivery freight carrier, and contact TRUE. from the wood skid and set the skid aside. Use appropriate tools, safety equipment, and PPE NOT install the appliance or put it in service. -
Page 8: Appliance Location
AIR CURTAIN truemfg.com AIR CURTAIN truemfg.com Installation & Setup (cont.) Installation & Setup (cont.) Appliance Location Procedure – Leveling Screws Procedure – 6" (152 mm) Leveling Legs Lower Rail Assembly If leveling screws are not factory installed, then, with access to the •... -
Page 9: Level The Appliance
1. Access the appliance bottom. Castor 2. If present, remove the leveling screws. Proper leveling of your TRUE appliance is critical to operating The following procedure describes sealing a non-mobile appliance success (for non-mobile appliances). Leveling impacts effective to the floor for NSF standards. This may not be required for your 3. -
Page 10: Shelf Installation
AIR CURTAIN truemfg.com AIR CURTAIN truemfg.com Installation & Setup (cont.) Installation & Setup (cont.) Shelf Installation TAC-72 TAC-48SM-LD Hook the shelf support tabs into the shelf standard in the rear Shelf Standard NOTICE › For ease of installation, it is recommended that the WARNING! corners and middle of the appliance. -
Page 11: Product Id Strip Installation
AIR CURTAIN truemfg.com AIR CURTAIN truemfg.com Installation & Setup (cont.) Installation & Setup (cont.) Product ID Strip Installation Wire Shelving Installation WARNING! Procedure 1. Turn the wire shelf around. The back of the shelf becomes the Overloading, incorrectly front. See fig. 1. installing, or improperly loading shelves can cause... -
Page 12: Appliance Operation
All you need to do is plug in the appliance. • Good air flow inside your TRUE appliance is critical. Take care to prevent product from pressing against the sides or back Mechanical Temperature Control wall and coming within 4"... -
Page 13: General Sequence Of Operation
AIR CURTAIN truemfg.com AIR CURTAIN truemfg.com Appliance Operation (cont.) Notes General Sequence of Operation — Refrigerator and Freezer Appliances USER ACTION! For more information regarding a appliance's temperature control adjustment or general sequence of operation, please see our Temperature Control Adjustment—Sequence of Operation Manual in our resource library at truemfg.com/service-manuals/sequence-of-operation or scan the code. -
Page 14: Maintenance & Servicing
(OEM) components such as those shown in fig. 1. OEM parts installing, moving, or servicing the appliance. minimize the risk of possible ignition due to incorrect parts. Fig. 1. Example of OEM parts. Use of non-OEM components may void TRUE's warranty. Sharp Edges! Moisture from improper drainage Slippery Surfaces! •... -
Page 15: Recommended Maintenance
AIR CURTAIN truemfg.com AIR CURTAIN truemfg.com Maintenance & Servicing (cont.) Maintenance & Servicing (cont.) Recommended Maintenance Model: Serial Number: See recommended maintenance tasks and frequencies below. Some tasks may be required more frequently based on your installation. Maintenance Tasks Monthly Quarterly Annually Jan. -
Page 16: Condenser Coil Cleaning
• Tank of compressed air Fig. 1. Louver grill screw location (A). Pull the grill from the appliance front (B). Fig. 2. TAC-14GS-HC-LD Grill removal. Lift grill away from cabinet after removing Use appropriate tools, safety equipment, and PPE screws. -
Page 17: General Surface Care & Cleaning
• DO NOT use sharp tools or knives to scrape a gasket. use any steel wool, abrasive, or chlorine- Risk of electrical shock or fire! DO NOT True offers environmentally-friendly cleaner and polish through based products to clean stainless steel surfaces. • Avoid full-strength cleaning products. DO NOT... -
Page 18: Tips To Help Prevent Rust On Stainless Steel
AIR CURTAIN truemfg.com AIR CURTAIN truemfg.com Maintenance & Servicing (cont.) Warranty Information (USA & Canada Only) 8 Tips to Help Prevent Rust on Stainless Steel Warranty Information Maintain the Cleanliness of Your Equipment Rinse Avoid build-up of hard stains by cleaning frequently. Use When using chlorinated cleaners, you must rinse and wipe dry cleaners at the recommended strength (alkaline chlorinated or immediately. - Page 19 truemfg.com 12/13/2023 P#975542 TEC_TM_086 | REV. C | EN DF_222954_11.23...
Need help?
Do you have a question about the TAC-14GS-HC-LD and is the answer not in the manual?
Questions and answers