Note On Som Replacement; Configuring Bios - GE LOGIQ S8 Service Manual

GE H DRAFT
EALTHCARE
D 5394227, R
IRECTION EVISION
5.) Unscrew four screws to separate DVR from the GFS..
8-19-4

Note on SOM Replacement

SOM retains its memory (date/time/BIOS setting) by receiving 3V from coin battery on GFS Board.
Therefore, when SOM and GFS boards are separated, SOM is likely to loose its date/time setting. In
such case, follow the procedure outlined below to update BIOS information.
8-19-4-1

Configuring BIOS

1.) On bootup, press "DEL" to access BIOS.
2.) When password is prompted, enter "polaris" from AN Keyboard.
3.) After successfully entering BIOS, verify the following parameters.
Table 8-3
TAB
Main
4.) Change date/time parameters as needed, and save the changes.
5.) Reboot the console.
3 DRAFT (N
Figure 8-77 Push the SOM in both side of GFS Assy
Figure 8-78 Drawing up the DVR
Configuring BIOS
top menu
System Time
System Date
Chapter 8 - Replacement Procedures
17, 2011)
OVEMBER
LOGIQ™ S8
S M
ERVICE ANUAL
8-63