GE H
DRAFT
EALTHCARE
D
5394227, R
IRECTION
EVISION
Section 8-13
Replacement of the Caps for Hardkeys
8-13-1
Manpower
One person, approx. 1 minute/cap.
8-13-2
Tools
Small-sized slotted screwdriver or tweezers.
8-13-3
Removal Procedure
1.) By means of a small slotted screwdriver, carefully push against the hardkey cap.
2.) Lift the cap, until it is completely loosened from its base.
3.) Place the new hardkey cap down until it snaps into position.
NOTE:
Each of the key have "Slit" where flathead screwdriver can be inserted for easy removal.
3
DRAFT (N
Figure 8-39 Push against the circle cap and lift it
"Slit" for removal
Figure 8-40 Slit for removal
Chapter 8 - Replacement Procedures
17, 2011)
OVEMBER
LOGIQ™ S8
S
M
ERVICE
ANUAL
8-37