Installation Procedure; Functional Check - GE LOGIQ S8 Service Manual

GE H RAFT
EALTHCARE
D 5394227, R
IRECTION EVISION
3.) Remove cables from printer.
4.) Unscrew four screws and pull put the B/W printer.
8-24-1-1-4

Installation Procedure

1.) Parts to be installed in reverse order on removal.
8-24-1-1-5

Functional Check

Test 1: Print an image by pressing the button P1 on the operator panel. (P1 key should be
configured correctly)
Verify1: - Verify that image can be printed.
Verify2: - Verify that printed image has no distortion as compared the image on screen.
8-86
3 DRAFT (N
Figure 8-113 Removal Color printer BRKT
Section 8-24 - Replacement of the Peripherals
17, 2011)
OVEMBER
LOGIQ™ S8
S M
ERVICE ANUAL