Installation Procedure - GE LOGIQ S8 Service Manual

GE H DRAFT
EALTHCARE
D 5394227, R
IRECTION EVISION
4.) Unscrew 2 screws, then separate the Monitor from the Monitor Stand Arm. Refer to the figure
below.
8-11-5

Installation Procedure

1.) Parts to be installed in reverse order of removal.
NOTE: When installing Monitor Cable Holder Bracket, be sure to assemble bracket with cable clamp as show
below.
3 DRAFT (N
Figure 8-22 Unscrewing 2 screws & separating the Monitor
Chapter 8 - Replacement Procedures
17, 2011)
OVEMBER
Figure 8-23
LOGIQ™ S8
S M
ERVICE ANUAL
8-25