Heater Replacement; Packing List/Spare Parts - Pace ST 45 Operation And Maintenance Manual

Heater Specifications: PS-90 = 8-10 ohms
PS-70 = 11.3-12.3 ohms
Connector Plug Pin-Outs
PS-70/PS-90 Heater Replacement
Ensure that the installed heater of the PS-70/PS-90 handpiece is defective by referring to Table 4
(Heater Assembly Checkout Procedures). If replacement becomes necessary, perform the following
procedure to ensure optimum performance and maximize the
life expectancy of the heater.
1. Allow the heater to cool.
2. Remove the Heater Retaining Nut.
3. Pull the Heater Assembly from the Handle. Discard
defective Heater Assembly.
4. Align the connector key on the handle end of the
replacement Heater Assembly with the keyway slot on
the handle.
5. Push the Heater Assembly fully into the handle.
6. Replace the Heater Retaining Nut and tighten by
hand.
Packing List
Item # Description
1 System Power Supply
2 PS-70 Handpiece Kit
(37W)
3 PS-90 Handpiece Kit
(51W)
4 TT-65 Handpiece (74W)
5 Power Cord, 115V
6 Power Cord, 230V
7 TT-65 Tip & Tool Stand
8 ST TT Accessory Kit
9 Tip Tool
10 Operations Manual
11 TT-65 Operation Manual
Spare Parts
Item # Description
1 Fuse, 1.0 Amp Time Lag (ST 45 and ST 55)
©2001 PACE Inc., Laurel, Maryland
All Rights Reserved
Defective Heater
Table 4: Heater Assembly Diagnostic Procedures
ST 45 or ST 55
Part Number ST 45
ST 55
------
6993-0236-P1
6993-0199-P1
7025-0001
1332-0094
1332-0093
-----
-----
1100-0206
5050-0453
5050-0336
Table 5: Packing List
Replace Heater Assembly
Quantity Supplied
ST 45 or ST 55
with PS-70 with PS-90
ST 45E ST 45 ST 45E
ST 55E ST 55 ST 55E
1 1 1
0 0 1
1 1 0
0 0 0
1 0 1
0 1 0
0 0 0
0 0 0
1 1 1
1 1 1
0 0 0
PACE Part Number
1159-0246-P5
ST 45 TT
ST 45 ST 45E
1 1 1
1 0 0
0 0 0
0 1 1
0 1 0
1 0 1
0 1 1
0 1 1
1 1 1
1 1 1
0 1 1
Page 18 of 20