Table of Contents
Advertisement
Using the Optional Instant Setback Cubby (Part Number 6019-0071-P1)
The HW 50 and TW 50 can be used with the optional Instant
Setback Cubby. When the TD-100 handpiece is inserted into
the Cubby, the system will automatically go into the Setback
Mode after 45 seconds of non-use. Once the Handpiece is
removed from the Cubby, it will return to normal operation.
Corrective Maintenance
Handpieces
Please refer to the TD-100/MT-100 Handpiece Manual for the maintenance procedures.
Power Source
Refer to the table below. Most malfunctions are simple and easy to correct.
Symptom
No power to
system
Handpiece will
not heat
Replacement Power Modules
©2005 PACE Inc., Annapolis Junction, Maryland
All Rights Reserved
Instant Setback Cubby Cable
Probable Cause
Solution
Blown Fuse
Replace the fuse (located in the AC Receptacle
Fuse Holder) with one of the same rated value.
No Supply Voltage
Verify that the AC outlet is active.
Defective Heater
Change Tip Cartridge. Refer to the TD-100/MT-
100 Handpiece manual for the maintenance
procedures.
Power Source
Contact PACE
Malfunction
Power Source Corrective Maintenance
Description
Power Modules
5/Green
5.5/Blue
6/Orange
6.5/Gold
7/Red
7.5/Purple
8/Black
8.5/Silver
PACE Part Number
1207-0362-01-P1
1207-0362-02-P1
1207-0362-03-P-1
1207-0362-04-P1
1207-0362-05-P1
1207-0362-06-P1
1207-0362-07-P1
1207-0362-08-P1
Page 14 of 17
Advertisement
Table of Contents
