Installing The Software; Reinstalling The Operating System; Delivery State Of The Pre-Installed Software; Boot Mode - Siemens SIMATIC IPC127E Operating Instructions Manual

5.5

Installing the software

5.5.1

Reinstalling the operating system

Information on installation of the operating system is available on the Internet and on the
supplied USB stick:
● Microsoft® Windows® 10
(https://support.industry.siemens.com/cs/ww/de/view/109749498/en?dl=en)
5.5.2

Delivery state of the pre-installed software

5.5.2.1

Boot mode

Note
Setting Boot mode
We recommend that you restore the target system in the Boot mode that was set in the
delivery state.
• Windows 10: UEFI Mode (UEFI = Unified Extensible Firmware Interface)
5.5.2.2

Partitions under Windows 10

Partitioning the hard disk or the SSD drive
For the Windows 10 operating system (boots in UEFI mode (GPT data storage medium)),
the following partitions are set up in the delivery state:
Partition
First
Second
SIMATIC IPC127E
Operating Instructions, 01/2019, A5E44296915-AA
Name Size of data storage medium
32 GB
SYSTEM 25 GB
DATA Remainder
Device maintenance and repair
64 GB 128 GB
40 GB 100 GB
Remainder Remainder
5.5 Installing the software
File system
NTFS (not compressed)
NTFS (not compressed)
51